loading

OEM & ODM Services For Your Protective Covers.

Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 1
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 2
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 3
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 4
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 5
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 6
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 1
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 2
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 3
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 4
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 5
Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13 Laptop Compartment 6

Tactical Car Seat Back Organizer & Heavy-Duty Kick Mat Protector – 600D MOLLE Panel with Tissue Dispenser & 13" Laptop Compartment

Engineered for tactical readiness, overland expeditions, and heavy-duty utility, the JK Covers Tactical Car Seat Back Organizer & Kick Mat Protector combines modular gear expansion with rugged seatback defense. Measuring 24.4" × 16.5" × 2.36" (62 cm × 42 cm × 6 cm), this heavy-duty unit is manufactured from premium 600D water-resistant and scratch-resistant polyester with reinforced edge binding to protect factory upholstery from muddy boot scuffs, dirt, and pet claw marks. The upper section features an 11" × 7" tactical MOLLE webbing grid and loop Velcro field for modular pouches, tools, and morale patches. Designed for complete cabin convenience, it integrates a dedicated 2-in-1 tissue/wipes dispenser, a deep bottle pocket with a key D-ring, an accessory tool pouch, dual front slip pockets, and an oversized 14.5" × 8.2" main compartment capable of storing up to 13-inch laptops, tablets, or tactical IFAKs. Dual-point adjustable buckle straps (top 16"–28", bottom 22"–34") guarantee a tight, anti-sag flush fit across trucks, SUVs, Jeeps, and commercial fleet vehicles. Backed by 15+ years of factory-direct OEM/ODM expertise, JK Covers provides bespoke pocket tailoring, private labeling, and rapid 3–5 day prototyping for global automotive brands and tactical retailers.
5.0
design customization

    oops...!

    no product data.

    Go to homepage

    Product Specifications & Technical Details

    Product Name Tactical Car Seat Back Organizer / Heavy-Duty Kick Mat Seat Protector
    Overall Dimensions (H × W × D) 24.4" × 16.5" × 2.36" (62 cm × 42 cm × 6 cm) [Full Seatback Coverage]
    Primary Material Heavy-Duty 600D Polyester/Nylon with Water-Resistant & Scratch-Resistant Coating
    Compartment Breakdown • Top MOLLE & Patch Panel: 11" × 7" (28 × 17.8 cm)
    • Deep Bottle/Umbrella Pocket: 6.1" × 3.1" (15.5 × 7.9 cm) with Key D-Ring
    • Accessory Tool Pocket: 5.1" × 5.1" (13 × 13 cm)
    • 2-in-1 Dedicated Tissue Dispenser: 9.4" × 5.1" (23.9 × 13 cm)
    • Large Main Storage Compartment: 14.5" × 8.2" (36.8 × 20.8 cm) [Fits 13" Laptops]
    • Dual Front Open Slip Pockets: 7.2" × 6.3" (18.3 × 16 cm)
    Mounting & Straps Top Headrest Buckle Strap (16"–28") + Bottom Anchor Buckle Strap (22"–34") with Quick-Release Buckles
    Vehicle Compatibility Universal fit for Pickup Trucks (F-150, Silverado, RAM, Tacoma), SUVs, Jeeps, Vans, Patrol Cars, and Sedans
    Standard & Custom Colors Standard Tactical Black; OEM Options: Coyote Tan, Ranger Olive Green, Wolf Grey, and Custom Camo
    OEM/ODM Capabilities Custom logo (3D rubber badge/embroidery/woven label), custom fabric grades (600D/900D/1000D), custom pocket layouts, retail packaging

    Key Features & Functional Benefits

    1. Modular Tactical MOLLE Grid & Morale Patch Field

    The upper 11" × 7" panel features rows of reinforced high-tensile MOLLE webbing for attaching tactical pouches, flashlights, pocket knives, multitools, and trauma shears. An expansive loop Velcro field allows attachment of standard morale patches, unit emblems, or identification tags.

    2. Dedicated One-Hand Tissue Dispenser Pocket

    Eliminates driver distraction and cabin clutter. The central 2-in-1 pocket (9.4" × 5.1") features an engineered dispensing slot that holds standard facial tissue packs or wet wipes, providing smooth, single-handed dispensing for front and rear passengers.

    3. Oversized 13" Laptop & Large Gear Storage

    The generous lower main compartment (14.5" × 8.2") is sized to hold up to 13-inch laptops, tablets, clipboards, rain gear, or emergency IFAK first aid supplies, keeping valuable equipment out of plain view and off dirty floorboards.

    4. Heavy-Duty 600D Water-Repellent & Kick-Proof Shield

    Covering 24.4" × 16.5" of seat surface, the high-density 600D fabric shields factory leather and upholstery from muddy boots, active toddler kicking, dirt, scratches, and beverage spills. Cleaning requires only a quick wipe with a damp microfiber cloth.

    5. Dual-Point Anti-Sag Mounting System

    Reinforced top and bottom quick-release buckle straps allow fast, tool-free installation. The adjustable length straps (top 16"–28", bottom 22"–34") pull the organizer flat and secure against the seatback, eliminating annoying sway during sharp turns or sudden braking.

    Installation & Maintenance Guide

    Quick 3-Step Setup

    1. Step 1 (Top Anchor): Wrap the top buckle strap around the front seat headrest posts, click the buckle closed, and tighten to desired position.
    2. Step 2 (Bottom Anchor): Fasten the lower buckle strap around the base frame of the front seat.
    3. Step 3 (Tension Adjustment): Pull both strap adjusters firmly to achieve a snug, flush fit against the seatback contour.

    Cleaning & Maintenance

    • Routine Care: Wipe surface dirt, dust, and shoe scuffs using a clean, damp microfiber cloth.
    • Deep Cleaning: Unclip both straps, empty all compartments, spot clean with mild detergent and water, and allow to air dry completely.

    OEM & ODM Custom Manufacturing Capabilities

    Backed by over 15 years of technical automotive soft-goods manufacturing experience, JK Covers (Ningbo JK Auto Accessory Limited) offers comprehensive end-to-end customization for global automotive brands, distributors, and fleet clients:

    Customization Scope Available Technical Options
    Custom Branding & Badging High-definition 3D injection-molded rubber badges, precision logo embroidery, woven labels, laser-engraved zipper pulls, and screen printing.
    Fabric & Tactical Colorways Available in 600D Polyester, 900D Oxford, 1000D Cordura-grade Nylon, and heavy-duty ripstop weaves; Tactical Black, Coyote Tan, Ranger Olive Green, Wolf Grey, and Camo.
    Modular Layout Tailoring Custom pocket depths, specialized MOLLE webbing spacing, divider additions, thermal bottle insulation, or firearm retention straps.
    Retail & FBA Packaging Retail display color boxes, custom printed cardboard sleeves, branded polybags, barcode labeling, and Amazon FBA carton compliance.
    Rapid Prototyping & Scaling Fast 3–5 business day prototype sample turnaround with flexible low-MOQ programs and scalable mass production capacity.

    Why Partner with JK Covers

    • 15+ Years Manufacturing Heritage: Dedicated to professional automotive interior accessories and protective soft goods since 2009.
    • Direct Factory Pricing: Eliminates trading middleman costs to maximize commercial profit margins for brand owners.
    • In-House Quality Control: Strict tensile testing on webbing straps, seam reinforcement inspections, and abrasion resistance verification.
    • Global Logistics & DDP Solutions: Comprehensive international ocean/air shipping management, DDP fulfillment, and strict OEM brand IP protection.

    Frequently Asked Questions (FAQ)

    Q1: What are the exact dimensions of this tactical seat back organizer?

    The organizer measures 24.4 inches (62 cm) in height, 16.5 inches (42 cm) in width, and has an unexpanded depth of approximately 2.36 inches (6 cm), providing comprehensive seatback coverage.

    Q2: Will this organizer hold a 13-inch laptop or full-size tablet?

    Yes. The large bottom zippered compartment (14.5" × 8.2") is specifically dimensioned to hold 13-inch laptops, full-size tablets, notebooks, and large documents securely.

    Q3: How does the tissue dispenser pocket work?

    The 9.4" × 5.1" central pocket features an integrated dispensing slot, allowing standard facial tissue packs or wipes to be accessed smoothly with one hand while keeping the rest of the compartment closed.

    Q4: Will this organizer sag or swing when fully loaded?

    No. Dual heavy-duty adjustable buckle straps (top 16"–28", bottom 22"–34") anchor firmly to both the headrest and lower seat frame, keeping the heavy-duty 600D panel flat and rigid against the seatback.

    Q5: What vehicle types is this organizer compatible with?

    It features a universal fit suitable for most passenger vehicles, including Pickup Trucks (Ford F-Series, Chevy Silverado, RAM, Toyota Tacoma), SUVs, Jeeps, Minivans, Commercial Vans, and Sedans.

    Q6: How do I clean and maintain the 600D fabric?

    The water-resistant 600D polyester fabric repels stains and mud. Simply wipe it clean with a damp cloth or microfiber towel for daily maintenance.

    GET IN TOUCH WITH US
    just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
    Related Products
    Ready to work with us ?
    Contact Us

    Contact Person: Johnson

    Tel: 86-13386615919

    Mail: info@jkcorp.cn

    Add: No 88, Lane 225, Kaiyuan Rd, Hongtang, Jiangbei, Ningbo

    Copyright © 2026 JK  | Sitemap |  Privacy Policy
    Contact us
    messenger
    phone
    email
    wechat
    Contact customer service
    Contact us
    messenger
    phone
    email
    wechat
    cancel
    Customer service
    detect